Products
-
3m LC UPC to LC UPC Simplex OS2 Single Mode 7.0mm LSZH FTTA Outdoor Fiber Patch Cable
Specification
- GYFJH Cable
1.1 Structure:
1.2 Application
Mainly used in wireless base station horizontal and vertical cabling
1.3 Features
1, Good mechanical and environmental characteristics;
2, Flame retardant characteristics meet the requirements of relevant standards;
3, The mechanical characteristics of jacket meet the requirements of relevant standards;
4, Soft, flexible, water blocked, UV resistant, easy to lay and splice, and with big capacity data transmission;
5, Meet various requirements of market and clients
1.4 Cable Parameters
Fiber Count Cable Dimensionmm Cable Weightkg/km TensileN CrushN/100mm Min. Bend Radiusmm Range of Temperature Long Term Short Term Long Term Short Term Dynamic Static 2 7.0 42.3 200 400 1100 2200 20D 10D -30-+70 Note: 1. All the values in the table, which are for reference only, are subject to change without notice;2. The cable dimension and weight are subject to the simplex cable of 2.0 outer diameter; 3. D is outer diameter of the round cable;
- one single mode fiber
Item
Unit
Specification
Attenuation
dB/km
1310nm≤0.4
1550nm≤0.3
Dispersion
Ps/nm.km
1285~1330nm≤3.5
1550nm≤18.0
Zero dispersion wavelength
Nm
1300~1324
Zero dispersion slope
Ps/nm.km
≤0.095
Fiber cutoff wavelength
Nm
≤1260
Mode field diameter
Um
9.2±0.5
Mode field concentricity
Um
<=0.8
Cladding diameter
um
125±1.0
Cladding non-circularity
%
≤1.0
Coating/cladding concentricity error
Um
≤12.5
Coating diameter
um
245±10
bending, dependence induced attenuation
1550nm, 1turns,32mm diameter 100rums,60mm diameter
≤0.5 db
Proof test
kpsi
≥100
- Connector Specification
ITEM
PARAMETER
Connector type
DLC/UPC . FC/UPC Insertion Loss
<=0.3db
Return Loss
>=50db
Fiber mode
Single mode 9/125
Operating wavelength
1310nm, 1550nm
Test wavelength
1310nm, 1550nm
Repeatability
<=0.1
Interchangeability
<=0.2dB
Durability
<=0.2dB
Fiber Length
1m, 2m….. any length optional.
Length and tolerance
10cm
Operating Temperature
-40C ~ +85C
Storage Temperature
-40C ~ +85C
-
Fiber Adapter Panel with 36 Fibers OS2 Single Mode 18 x Shuttered LC UPC Duplex (Blue) Adapter
FHD Series of 18-port LC Duplex Connector, Zirconia Ceramic Sleeve Adapter Panel
FHD series adapter panel pre-loaded with fiber adapters that provides a means to connect backbone-to-backbone
or backbone-to-horizontal fiber cabling. Used with FHD® series enclosure and for pre-terminated Plug-n-Play cabling system, it provides a more stable, compact solution for your network.
FHD High Density Series is a versatile solution in multiple sizes (1U/2U/4U) and styles for building backbones, data centers and enterprise applications. -
OEM Factory CNC lathe machine Parts custom cnc machining set service cnc lathe machine parts
Looking for a reliable, quick-turn supplier of machined plastic and metal components? With hundreds of CNC machines, the unmatched capacity of our in-house digital factories ensure your parts are shipped on-time, every single time. At Protolabs, our CNC machining facilities are designed for both rapid prototyping and low-volume production of end-use components. But through our digital network of manufacturers at HTLL, you can unlock advanced machining capabilities like tighter tolerances, volume pricing, and anodizing. We’re your single supplier of machined parts with manufacturing tailored to your project needs.
-
23” to 19”1U/2U/5U Fiber optic Rack reducer brackets
23′ to 19”1U/2U/5U Fiber optic Rack reducer brackets
Shipping Method:Small Package (UPS)
The RB-1U converts your 23 or 24 inch wide rack to support 1u of EIA 19 inch wide rackmount equipment. Made of 16-gauge steel and sold in pairs, these reducer brackets feature universal square hole mounting providing you the ultimate flexibility for your rack.
We also accpet OEM service. any metal parts can be produce
-
OM3/OM4 MTP 8 Key Up to Key Up (Charcoal Gray) Adapter Fiber Adapter Panel
FHD Series Adapter Panel of 8 MTP® Connector, Key Up to Key Up
FHD adapter panel pre-loaded with fiber adapters that provides a means to connect backbone-to-backbone or backbone-to-horizontal fiber cabling. Used with FHD® series enclosure and for pre-terminated Plug-n-Play cabling system, it provides a more stable, compact solution for your network. Further, the key up to key up method does not support single mode with standards compliant connector endfaces. The US Conec’s MTP brand adapters are fully compliant with IEC Standard 61754-7 and TIA 604-5.
FHD High Density Series is a versatile solution in multiple sizes (1U/2U/4U) and styles for building backbones, data centers and enterprise applications.
-
6-Port Multimedia Fiber Modular adapter Panel with 6 x Plastic Clips
And with its standardized dimensions, it is suitable for easy snap-in mounting of Cat5e/Cat6/Cat6a copper inline couplers or keystone jacks, and fiber optic adapters or keystone jacks. Compatible with FHD® series fiber enclosures, it offers integrated cable management features, reduces required rack space and provides future proofing in system design.
High Density Series is a versatile solution in multiple sizes (1U/2U/4U) and styles for building backbones, data centers and enterprise applications.
Modular Design to Simplify Your Cabling SystemThe panel can be used with different adapters according to your needs for better cabling. -
5U 23″ to 19″ Rack Reducer
A simple solution for 23″ rack.
How do you install a standard 19” rack equipment in to a 23” relay rack or 23” 4 post cabinet? The answer is simple. You need a RCB1060 series 23” to 19” RACK Reducer. RCB1060 gives you the 2” extension you need for right side and left of your cabinet to fill the gap.
What is a RACK REDUCER ?
RCB1060 PEM Nut 23” to 19” rack reducer is a special 2” wide bracket design for mounting 19” rack equipment in a 23” cabinet. You need two brackets for right and left side of your cabinet to properly install your 19” rack equipment.
Save Money and save enviroment.
If you own a 23” telecom relay rack or 23” 4 post cabinet, you can reuse and repurpose a section for 19” rack application. Your 23” telecom cabinet offers the exact same features as a standard 19” rack cabinet except for the width. By using our RCB1060 PEM nut rack reducer, instead of paying full price for a brand new 19” rack, you only pay fraction of cost for a pair of RCB1060 rack reducer. You are not only saving money, you are also saving the environment by reusing resource. RCB1060 offer size from 1U up to 5U to choose from
-
1U Rack Mount Type PLC Splitter
Material: 1.2mm High Grade Cold Rolled Steel Plate. Surface sandblasting treatment.
Material Coating: Powdered.
Dimension : 482mmx280mmx2U (must fit in 19 inch rack)
Suitable Adapters: Easy to install SC Fiber Adapters & Pigtails. SC/APC SC/UPC. All types of Connectors/adopters can be installed (SC and LC).
Number of Trays: 4 Splice Tray include PLC splitter slot adjustable for splitter 1:4, 1:8 and 1:16
-
OEM Sheet Metal Spinning Processing
Metal spinning, also known as spin forming or spinning, is a metalworking process that involves rotating a metal disc or tube on a lathe while applying pressure with a tool to shape it into a desired form. The process is commonly used to create cylindrical or conical shapes such as bowls, vases, and lampshades, as well as complex geometries like hemispheres and paraboloids.
During metal spinning, the metal disc or tube is clamped onto a lathe and rotated at high speed. A tool, called a spinner, is then pressed against the metal, causing it to flow and take on the shape of the tool. The spinner can be either hand-held or mounted on the lathe. The process is repeated multiple times, with the shape gradually refined with each pass until the final form is achieved.
Metal spinning can be performed using a wide range of metals, including aluminum, copper, brass, stainless steel, and titanium. It is commonly used in the manufacturing of components for the aerospace, automotive, and lighting industries, as well as for decorative and artistic purposes.
-
1.25mm/2.5mm SC LC FC ST Fiber connector clean Fiber optic cleaning sticks
fiber optic clean stick is used for cleaning the end-faces inside the plug-in fiber-optic connectors and various adaptors and connectors .
Suitable for cleaning inside adaptors due to dust control.
Two types of Cleaning Stick
Type1 : ø2.5mm
Type 2: ø1.25mm
Connectors cleaned: SC, SC2, FC, ST, DIN, D4 MU, LC, MT
-
LC/UPC-LC/UPC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber patchcord
LC/UPC-LC/UPC Duplex Fiber optic patch cord
Optical Fiber Patch Cord (Jumper) is a length of optical fiber with two ends adding connectors to connect beam path. Pigtail is a length of fiber permanently attached connector only at one end. B&D patch cords assembled with various types of connectors (such as FC, SC, ST, LC, MU, MTRJ, etc.) There are three kinds of polished fiber end-face: PC, UPC and APC. we employ advanced technique and equipment to manufacture so as to ensure the high quality of mass production.
-
Mini Fiber optic splice protective closure
Mini Fiber Protective box is used for protecting the fiber splicing.
Suitable for FTTH joint protection between indoor cable or pigtail of ¢3.0 (2.0)
Compact and flexible
Simple and practical
HTLL is an exprience factory in fiber product filed.we can provide OEM service.
SAMPLE FREE,JUST CONTACT US ~
